M9484F1023/U Honeywell

Modutrol IV Motors are spring return and non-spring return motors used to control dampers and valves. M94xx models are optimized for use in burner applications and use a 135Ohm modulating proportional signal to position the motor shaft to any point between open and closed.

Specifications:

Approvals: CE, UL, FM, CSA, EAC

Ambient temperature: -40… 66C

Control signal: modulating, 0-150 Ohm.

Execution time: 15-27 s

Stroke: Adjustable; 90 to 160 degrees, symmetrical.

Torque capacity: 8.5 Nm 

Screw terminals are standard.

Die-cast aluminum housing.

Protection class: IP44

Input voltage: 24 Vac

Line frequency: 50/60 Hz 

Shaft mounting: 9.5mm (3/8 ") square for all models at both ends

Function: normally closed

Specification Sheet (PDF)