Description
UV QRA4.U Flame Detector for supervision of gas flames, yellow or blue oilflames and for ignition spark proving.
Operation:
When the UV radiation of the flame in the position of the detector is high enough, the detector is activated during each half wave, giving a signal current. With this type of flame supervision, the UV radiation emitted by gas or oil flames is used to generate the flame signal.
- UV flame detector for frontal illumination.
Operation:
When the UV radiation of the flame in the position of the detector is high enough, the detector is activated during each half wave, giving a signal current. With this type of flame supervision, the UV radiation emitted by gas or oil flames is used to generate the flame signal.
Specifications:
- UV flame detector for frontal illumination.
- For direct mounting on the burner.
- Intermittent use.
- Housing made of aluminium, with ¾“-14NPSM connecting thread for fitting the detector to the burner or boiler. Connecting wires of about 1.8 m length for the electrical connection.
- ½“ - 14NPSM thread for a fitting, required for the connection of a Menzel tube for protecting the connecting wires (½“ conduit)
- Temperature Range: -20 to 60 °C.
For burner control drives:
LFL...
LFE1...
LFE10...
LGB2... / LGB4... with AGQ1...
LME21...A2 / LME22...A2 with AGQ3...
LME39...A2 with AGQ3...
LME41...A2 / LME44...A2 with AGQ3...
LME7...
LMV2… / LMV3…
LMV5... with AGQ1...
For burner control drives:
LFL...
LFE1...
LFE10...
LGB2... / LGB4... with AGQ1...
LME21...A2 / LME22...A2 with AGQ3...
LME39...A2 with AGQ3...
LME41...A2 / LME44...A2 with AGQ3...
LME7...
LMV2… / LMV3…
LMV5... with AGQ1...
Related products